Take the time to teach your teen about proper tire care.
Tires are the only part of a vehicle making direct contact with the road, so it’s critical to make sure they are road-ready. Bridgestone's safety slogan encourages drivers to "inflate, rotate, and evaluate."
• Inflate: To check tire inflation, use a tire pressure gauge to make sure your tires have the proper inflation pressure. A lot of people mistakenly think that the correct inflation pressure is on the tire’s sidewall, but that’s not correct. What’s listed on the sidewall is the maximum inflation pressure for the tire, and not necessarily what’s appropriate for the load carrying capacity of a particular vehicle. To find the proper tire inflation pressure for your vehicle, refer to the placard that’s located in the driver’s side doorjamb or your vehicle owner’s manual. Tire pressure should be checked at least once each month, as tires can lose one psi (pounds per square inch) of pressure under normal operation. Also, for every 10 degree drop in temperature, tires lose one psi. Proper tire inflation pressure is critical for safety, maximum performance and fuel efficiency.
• Rotate: Have your tires rotated and balanced every 5,000 to 7,000 miles (check your vehicle owner’s manual for specific vehicle manufacturer recommendations).
• Evaluate: Continually evaluate your tire’s tread depth to make sure you have enough traction to grip the road. The penny test is a simple way to do this. Just place a penny upside down in the tire’s tread. If any part of Lincoln’s head is covered by the tread, you should be good to go. If not, it may be time for a new set of tires.
Get all ten #AskPatty #BackToSchool #SafetyTips here at AskPatty.com
from Ask Patty - Automotive Advice for Women http://ift.tt/2d5LPGK
No comments:
Post a Comment